The 6 best cryptocurrency mining tools for Linux

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers

Hello Vertcoin Community,
Eager to contribute to the Vertcoin Community I began creating step by step walkthrough guides on how to get a Vertcoin node up and running on a Raspberry Pi, Raspberry Pi Zero and Intel NUC. Along with information to get a Vertcoin node up and running was also optional steps to install p2pool-vtc.
I decided that while this step by step guide might be helpful to a few, a setup script may prove to be useful to a wider range of people. I have this script to a point where I think it may be productive to share with a bigger audience, for those who are brave and have this hardware sitting around or like to tinker with projects; I invite you to test this setup script if you are interested, if you run into errors any sort of verbose console output of the error proves to be extremely helpful in troubleshooting.
The script was designed to produce a “headless” server... meaning we will not be using a GUI to configure Vertcoin or check to see how things are running. In fact, once the server is set up, you will only interact with it using command line calls over SSH. The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Why run a headless node on a Single Board Computer?
The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Required: USB Flash Drive 6GB - 32GB
Please note that the script was designed for Single Board Computers first and looks for an accessible USB Flash Drive to use for storing the blockchain and swap file, as constant writing to a microSD can degrade the health of the microSD.
Supports

Hardware

All of the hardware listed above is hardware that I have personally tested / am testing on myself. The plan is to continue expanding my arsenal of single board computers and continue to add support for more hardware to ensure as much compatibility as possible.
Functionality
It is worth noting that LIT can be ran with multiple configurations, the ones displayed in the Post Installation Report reflect values that run LIT with the Vertcoin Mainnet. Please be aware that the Vertcoin Testnet chain has not been mined 100% of the time in the past, if you make transactions on the Vertcoin testnet that do not go through it is likely because the chain has stopped being mined.
BE CAREFUL WITH YOUR COINS, ONLY TEST WITH WHAT YOU ARE OKAY WITH LOSING IF YOU USE THE MAINNET.

Vertcoin Testnet Coins

https://tvtc.blkidx.org/faucet/
I've included some documentation on LIT I created which includes information I found to be useful: https://github.com/e-corp-sam-sepiol/vertnode/blob/mastedocs/lit.md
Please visit the mit-dci/lit github repository for the most up to date information on lit: https://github.com/mit-dci/lit

Vertnode | Automated Vertcoin Node Installation Script

https://github.com/e-corp-sam-sepiol/vertnode

Recommended: Use Etcher to install the chosen OS to your microSD card / USB flash drive.

If you intend on installing Ubuntu Server 16.04 to your Intel NUC please use Etcher to install the .iso to your USB flash drive.
https://etcher.io/
PLEASE NOTE THIS SCRIPT MAY GIVE AN ERROR. THIS IS THE NATURE OF TESTING. PLEASE REPORT YOUR ERRORS IF YOU WANT THEM TO BE FIXED/RESOLVED. THANK YOU FOR BETTERING THE DEVELOPMENT OF THIS SCRIPT.

Ubuntu Server 16.04 Setup Details

You can use different clients to ssh into your node. One option is using PuTTY or Git Bash on Windows which is included in the desktop version of Git. If you are using Linux you can simply open a new terminal window and ssh to the IP address of your node (hardware you intend installing the Vertcoin node on).
You will need to know the IP address of your node, this can be found on your router page.
ssh 192.168.1.5 -l pi For example, this command uses ssh to login to 192.168.1.5 using the -l login name of pi. The IP address of your node will likely be different for you, in this example I am logging into a Raspberry Pi which has a default login name of pi.
A brief list of commands that can be used to check on the Vertcoin node status:
vertcoin-cli getblockchaininfo | Grab information about your blockchain
vertcoin-cli getblockcount | Grab the current count of blocks on your node
vertcoin-cli getconnectioncount | Grab the current count of connections to your node. A number of connections larger than 8 means that you have incoming connections to your node. The default settings are to make 8 outgoing connections. If you want incoming connections please port forward your Raspberry Pi in your Router settings page.
vertcoin-cli getpeerinfo | Grab the information about the peers you have connected to / are connected to
vertcoin-cli getnettotals | Grab network data, how much downloaded/upload displayed in bytes
tail -f ~/.vertcoin/debug.log | Output the latest lines in the Vertcoin debug.log to see verbose information about the Vertcoin daemon (ctrl+c to stop)
Thank you to all who have helped me and inspired me thus far, @b17z, @jamesl22, @vertcoinmarketingteam, @canen, @flakfired, @etang600, @BDF, @tucker178, @Xer0
This work is dedicated to the users of Vertcoin, thank you for making this possible.
7/20/2018 Thank you @CommodoreAmiga for the incredibly generous tip <3
You can reach me @Sam Sepiol#3396 on the Vertcoin Discord, here on reddit or @ [email protected]
submitted by ecorp-sam-sepiol to vertcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Uso del Full Node Wallet BTCP Bitcoin Private da Terminale Linux

In questo post voglio dimostrare alcuni utilizzi del Full Node Wallet Bitcoin Private da terminale Linux
AVVERTENZA:
Usate questo tutorial con un piccolo quantitativo di BTCP, nell'esempio utilizzo 0,01 BTCP, almeno fino a quando non vi sentite sicuri nell'uso dei comandi. Fate attenzione! I comandi vengono eseguiti senza possibilità di annullarli, salvo in casi eccezionali, quindi fate tutto a vostro rischio.
PREMESSA:
Il wallet è già stato installato sul vostro PC o in un server Cloud usando le seguenti istruzioni:https://github.com/BTCPrivate/bitcoinprivate
Io uso una Ubuntu 16.04 LTS 64bit, ma i comandi sono simili anche per la distribuzione Windows.
Andrebbe anche aperta la porta TCP 7932 per avere un wallet perfettamente funzionante, ma ho fatto le prove senza aprirla.
Come attivare il firewall:
sudo ufw status
Please note: Make sure you enter the code in this order! If you do not, the program will not work! (If need be you can disable your firewall by entering: sudo ufw disable)
sudo ufw default allow outgoing sudo ufw default deny incoming sudo ufw allow ssh/tcp sudo ufw limit ssh/tcp sudo ufw allow http/tcp sudo ufw allow https/tcp sudo ufw allow 7932/tcp sudo ufw logging on sudo ufw enable
Apri un nuovo terminale troverai il prompt dei comandi, il mio è così, ma potrebbe essere differente:
[email protected]:~$ 
Scrivi quello che segue e premi invio:
[email protected]:~$ ./BitcoinPrivate/src/btcpd --daemon 
dovrebbe apparire il seguente messaggio:
BTCP Server Starting 
Questo significa che hai avviato il server (full node wallet) in modalità daemon, silenziosa. Per fermarlo scrivi:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli stop 
Otterrai la risposta:
BTCP server stopping 
Puoi anche avviare il wallet in una finestra del terminale e vederlo lavorare, anzichè usare il comando --daemon
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Vedreai apparire un logo del BTCP formato da tanti caratteri e la seguente scritta:
Thank you for running a Bitcoin Private node! You're strengthening the network and contributing to a social good. To ensure you are fully protecting your privacy when running BTCP, see . Block height | 340079 Connections | 8 Network solution rate | 8359387 Sol/s You are currently not mining. To enable mining, add 'gen=1' to your btcprivate.conf and restart. Since starting this node 1 minutes, 33 seconds ago: - You have validated 695 transactions! [Press Ctrl+C to exit] [Set 'showmetrics=0' to hide] 
Block height è l'allineamento del wallet con la blockchain, richiede tempo perchè si allinei e scarichi tutta la blockchain, dipende dalla velocità del tuo collegamento e del tuo pc.Connections: 8 sono i nodi a cui è collegato il nostro wallet, che è un vero e proprio nodo.
Network solution rate è la "potenza" di tutta la rete di elaborare i blocchi in Sol/s
Con un full node puoi partecipare anche tu a rafforzare la rete, abilitando il mining. Si tratta di un solo mining, quindi le probabilità di risolvere un blocco sono veramente minime.
Per farlo basta aggiungere la voce gen=1 nel file btcprivate.conf
Proviamo a farlo. Blocchiamo il nodo con il comando CTRL + C e aspettiamo che appaia il prompt di comando.
Appena appare, inseriamo i seguenti comandi:
[email protected]:~$ cd .btcprivate [email protected]:~/.btcprivate$ ls 
ci siamo spostati nella directory nascosta (inizia per .) contenente i file di configurazione di BTCP, ls mostra i file contenuti:
blocks btcprivate.conf chainstate db.log debug.log fee_estimates.dat peers.dat wallet.dat 
puoi vedere il file btcprivate.conf e wallet.dat che è il file del wallet del nodo. Editiamo ora il file di configurazione, io uso PICO, un text editor per linux, ma potete usare anche vi se preferite:
[email protected]:~/.btcprivate$ pico btcprivate.conf 
inserite gen=1 in una riga vuota del file di configurazione e poi chiudete l'editor salvando con i comandi CTRL+X e Y
gen=1 
tornate nella directory home:
[email protected]:~/.btcprivate$ cd 
Fate riavviare il wallet con il comando:
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Otterrete il seguente output:
Block height | 340091 Connections | 8 Network solution rate | 8211926 Sol/s Local solution rate | 0.0075 Sol/s Since starting this node 8 minutes, 5 seconds ago: - You have validated 684 transactions! - You have completed 1 Equihash solver runs. You are mining with the default solver on 1 threads. 
Congratulazioni! State minando!
Ora diamo un occhiata al file wallet.dat
ATTENZIONE:
wallet.dat è il vostro wallet, se lo cancellate o lo riscrivete perderete tutti i BTCP che contiene. Consiglio di farne una copia ma attenzione: wallet.dat non è crittografato, quindi vi consiglio di crittografarlo prima di spostarlo dal PC: primo faccio una copia.
Bloccate nuovamente il wallet con CTRL+C
Al prompt scrivete:
[email protected]:~$ cd .btcprivate 
Poi copiate il file sul Desktop (scrivania) Sostituite la parola Desktop con Scrivania se avete installato Linux in Italiano
[email protected]:~/.btcprivate$ cp wallet.dat home/btcp/Desktop/wallet_btcp_back.dat 
Ora troverete il file wallet_btcp_back.dat sulla scrivania, crittografatelo AES256 usando il gestore degli archivi GUI e impostando una password resistente. Per verificare che tutto funzioni, vi consiglio di fare una altra copia di wallet.dat, estrarre il file dall'archivio crittato e sostituirlo al wallet.dat. se tutto funziona siete a posto. Se non siete sicuri non fate nulla e non usate questo wallet per mettere i vostri BTCP, ma nolo per scopi didattici con pochi spiccioli. E' facile fare errori e perdere tutto.
Tornate alla directory home e riavviate il server in daemon mode.
proviamo alcuni comandi usando il client: btcp-cli
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli help 
Se tutto funziona correttamente vi risponderà con la lista di tutti i comandi disponibili:
z_exportwallet "filename" z_getbalance "address" ( minconf ) z_getnewaddress z_getoperationresult (["operationid", ... ]) z_getoperationstatus (["operationid", ... ]) z_gettotalbalance ( minconf ) z_importkey "zkey" ( rescan startHeight ) z_importwallet "filename" z_listaddresses z_listoperationids z_listreceivedbyaddress "address" ( minconf ) z_sendmany "fromaddress" [{"address":... ,"amount":...},...] ( minconf ) ( fee ) z_shieldcoinbase "fromaddress" "tozaddress" ( fee ) zcbenchmark benchmarktype samplecount zcrawjoinsplit rawtx inputs outputs vpub_old vpub_new zcrawkeygen zcrawreceive zcsecretkey encryptednote zcsamplejoinsplit [email protected]:~$ 
Benissimo! Ora proviamo ad usare qualche comando, comunciamo con getinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getinfo 
Risposta:
{ "version": 1001251, "protocolversion": 180004, "walletversion": 60000, "balance": 0.00000000, "blocks": 340074, "timeoffset": 0, "connections": 8, "proxy": "", "difficulty": 167290.7158221716, "testnet": false, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000, "relayfee": 0.00000100, "errors": "" } [email protected]:~$ 
Nella risposta troverete alcune informazioni sul wallet, versione, block height, connections, balance = 0 ecc ecc
Proviamo ora getblockchaininfo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getblockchaininfo 
Risposta:
{ "chain": "main", "blocks": 340074, "headers": 340074, "bestblockhash": "0000000145c0011d8e914f4ba68d1443c7ae0dd15bdf0bc300994dd5282710aa", "difficulty": 165971.1181999981, "verificationprogress": 0.9999992572690658, "chainwork": "0000000000000000000000000000000000000000000000000002e8314e4484da", "pruned": false, "commitments": 663480, 
La sincronizzazione in questo caso è terminata:"verificationprogress": 0.9999992572690658, (99,99999%)
Ora proviamo getwalletinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 0, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } [email protected]:~$ 
Proviamo a ricevere dei BTCP da un wallet esterno, per prima cosa abbiamo bisogno di un transparent address da comunicare a chi ci invia i BTCP. Lo otteniamo con il comando getnewaddress:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Risposta: otteniamo un indirizzo (le xxx le ho aggiunte per mascherarlo)
b1Cabjwvcce7N8ea9Gxxxxxxxxxxxxxxxx [email protected]:~$ 
Inviate con un vostro wallet grafico o con electrum pochi BTCP, io ne ho mandati 0.01 per prova, dopo che li avete inviati, verificate se sono arrivati:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.01000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Arrivati ! "Unconfirmed balance" 0.01! non sono ancora confermati, quindi aspettate un po' e ripetete il comando:
"walletversion": 60000, "balance": 0.01000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 
Adesso balance è 0.01 perfetto!
Proviamo adesso ad inviare questi BTCP ad un nuovo T-Address, per semplicità li invierò ad un indirizzo di questo wallet
Generiamo un nuovo indirizzo per riceverli:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Otteniamo:
b1Nb42GoK9kmsxxxxxxxxxxxxx 
copiamo l'indirizzo e usiamo il comando sendtoaddress "btcpaddress" amount ( "comment" "comment-to" subtractfeefromamount )
il parametro subtractfeefromamount puo' essere true or false a seconda se vogliamo che le fee vengano detratte dall'ammontare inviato o meno. Io invio tutto quanto al nuovo indirizzo e quindi le fee vanno dedotte da questo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli sendtoaddress "b1Nb42GoK9kmsxxxxxxxxxxxxx" 0.01 "" "" true 
Risposta:
2c5d3d1a3b5eec414b721d3817487f53c5eebxxxxxxxxxxxxxxx [email protected]:~$ 
Controlliamo cosa è successo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00999808, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 2, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Come vedete i BTCP sono diminuiti, perchè sono stati spostati su un nuovo indirizzo dello stesso wallet, pagando le fee. Ora vediamo esattamente dove sono e dove erano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listreceivedbyaddress 
Risposta:
[ { "address": "b1Ep2wi2tUnKf433Vaxxxxxxxxxxxx", "account": "", "amount": 0.01000000, "confirmations": 6, "txids": [ "833533440a13c09fda6e90d0c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] }, { "address": "b1Nb42GoK9kmsVZ9KPxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "account": "", "amount": 0.00999808, "confirmations": 1, "txids": [ "2c5d3d1a3b5eec414b721d3817487f53c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] } 
Questo comando vi da informazione di tutti gli indirizzi usati, vediamo solo gli indirizzi non spesi: listunspent
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Risposta:
[ { "txid": "2c5d3d1a3b5eec414b721d381748xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1Nb42GoK9kxxxxxxxxxxxxxx", "account": "", "scriptPubKey": "76a914c6bdf3bc8aedxxxxxxxxxxxxxxxxxx", "amount": 0.00999808, "confirmations": 6, "spendable": true 
Ottimo!
Ora possiamo provare un comando che ci permette di estrarre la chiave provata da un indirizzo pubblico. Questo puo' essete utile in occasione di Fork o Airdrop per estrarre le monete.
ATTENZIONE: esporre a terzi le chiavi private è rischioso. Potrebbero rubare tutto il contenuto. Fate molta attenzione. Estraete le private keys solo se necessario o per fare delle prove su indirizzi che contengono pochi spicci. In ogni caso, dopo aver usato la private key meglio non riutilizzare quell'indirizzo.
Il comando da utilizzare è dumpprivkey T-ADDRESS
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli dumpprivkey b1Ep2wi2tUnxxxxxxxxxxx 
L'output sarà tipo il seguente, al solito la chiave è mascherata con delle xxxxxx
Kz29e62Bmxxxxxxxxxxxxxxxxxxxxxxx 
Ora proviamo lo swipe della chiave, cioè il wallet andrà a cercare nella blockchain tutti gli importi collegati a quella pvt key, : importprivkey "btcpprivkey" ( "label" rescan )
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli importprivkey "Kz29e62Bmxxxxxxxxxxxxxxxxxxxxx" "" true 
Ora proviamo a fare delle Shielded Transaction, queste transazioni utilizzano la tecnologia zk-Snark per mascherare importi e indirizzi. Per prima cosa dobbiamo ottenere un indirizzo Shielded dal nostro wallet.
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getnewaddress 
Eccolo generato:
zkEvCiVwgHb3NFi2ee9HGPjno2xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
Vediamo dove sono i nostri BTCP, al momento sono solo su indirizzi Transparent:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_gettotalbalance 
Answer:
{ "transparent": "0.00999808", "private": "0.00", "total": "0.00999808" } 
ora mandiamo qualche BTCP all'indirizzo z_address. Per prima cosa dobbiamo recuperare l'indirizzo t-address dove si trovano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Eccoli:
[ { "txid": "72f568d1ed51524b69f1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx", "scriptPubKey": "76axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe088xx", "amount": 0.00889808, "confirmations": 556, "spendable": true } ] 
Adesso mandiamo un po' di BTCP all'indirizzo Shielded che abbiamo ottenuto sopra. Il comando è abbastanza complicato ma funziona cosi':
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_sendmany "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx" "[{\"amount\":0.001, \"address\":\"zkEvCiVwgHb3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\"}]" 
Risultato:
opid-xxxxxxx-36c4-xxxx-beb2-xxxxxxxxxxxx 
Una transazione zk-Snark è piuttosto pesante da elaborare, il mio vecchio PC ci mette un po'. Meglio disattivare processi inutili. Si puo' controllare se l'operazione è andata a buon fine:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getoperationresult 
al termine dovreste ricevere il seguente output:
[ { "id": "opid-xxxxxx-xxxxx-4a5d-beb2-xxxxxxxxxx", "status": "success", "creation_time": 1529426885, "result": { "txid": "f87e8d5e96a8a0xxxxxxxxxxxxxxx" }, "execution_secs": 216.686332567, "method": "z_sendmany", "params": { "fromaddress": "b1LDhxxxxxxxxxxx", "amounts": [ { "amount": 0.001, "address": "zkEvCiVwgHb3NFxxxxxxxxxxxxxxxxxxR" } ], "minconf": 1, "fee": 0.0001 } } ] 
Fatto! Sul mio vecchio PC ci sono voluti 216,68 secondi!
La prossima prova sarà un invio da indirizzo Shielded a Transparent.
Play with your full node wallet and have fun.Remember: these commands are almost the same in all the bitcoin based coins, so you also learnt how to use many other wallets!
submitted by xivan71 to u/xivan71 [link] [comments]

How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS How to GPU mine NVIDIA on linux - ubuntu 16.04 - step by ... HOW TO: MINING BITCOINS SO FAST & EASY - 100GH/s FOR FREE ... Updated: How to Mine Zcash on Ubuntu - CPU Pool Miner Cgminer Raspberry Pi - Bitcoin Mining (330MH/s) - Mining 1 week (Rasbian

Ubuntu 20.04 Guide; How to stop/start firewall on RHEL 8 / CentOS 8 Install gnome on RHEL 8 / CentOS 8; Linux Download; How To Upgrade from Ubuntu 18.04 and 19.10 To Ubuntu 20.04 LTS Focal Fossa Enable SSH root login on Debian Linux Server CGMiner is a Bitcoin mining tool written with the C programming language. It is designed to run on ASIC mining devices, works on both Windows and Linux, and is ideal for advanced cryptocurrency users. The CGMiner application is command-line based, and users interact with it via a command-line interface. It can mine for Bitcoin using multiple methods (GPU and CPUs) and does it quite efficiently ... Best Bitcoin Mining Software Reviewed. By: Ofir Beigel Last updated: 8/23/20 If you’re thinking of getting into Bitcoin mining, one of the things you’re going to need is a software to run your mining hardware.In this post I’ll review the top Bitcoin mining software available on the market. 4. EasyMiner. EasyMiner is a GUI based software and it acts as a convenient wrapper for CGMiner and BFGMiner software.. EasyMiner can be used for solo mining, CPU mining, cuda mining, pool mining etc and it supports the stratum and getwork mining protocols. When available, it automatically uses AVX, AVX2, and SSE2. 5. BitMinter. BitMinter is a mining pool that wants bitcoin mining to be easy ... They must be synced with the Bitcoin network. Bitcoin Core is this type of wallet. Installing Bitcoin Core. Enough with the introduction, now I am going to show you how to install Bitcoin Core wallet on your Ubuntu 17.10 Desktop. Go to https://bitcoin.org and click on “Participate” -> “Running a full node”

[index] [47637] [36328] [17573] [41669] [42787] [16039] [12683] [11928] [48160] [42626]

How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS

-Miner stops mining if task manager is active (can be removed) -Varied mining speed based on if the computer is in use to avoid detection speed of your miner Low Fees monero mine free 2019 ↓↓↓ AURORAMINE - BEST AND FASTEST MINING BITCOIN ! ↓↓↓ **REGISTER HERE - https://goo.gl/1EKTWb ***REGISTER HERE - https://goo.gl/1EKTWb ****REGISTER HERE ... Binance - https://www.binance.com/?ref=12803159 Hashflare with 63 days to break even, 1-year contract - https://hashflare.io/r/AB31B34E Bitclub Network 5% re... *****UPDATE***** Solo mining has been removed from client. I'll keep the video up for how it used to work, it might still work for some alt coins (unsure) yo... SUBSCRIBE FOR MORE HOW MUCH - http://shorturl.at/arBHL Nviddia GTX 1080 Ti - https://amzn.to/2Hiw5xp 6X GPU Mining Rig Case - https://bitcoinmerch.com/produc...

#